thin film, rectangular, resistor chips www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 20028 144 revision: 15-sep-06 m10, m11, m12, m25 vishay draloric features ? metal film layer on high quality ceramic ? protective top coat ? pure tin on nickel barrier layer ? low temperature coefficient and tight tolerances ( 0.1 %; 10 ppm/k) ? 56 days at 40 c and 93 % relative humidity down to 0.2 % rohs compliant * higher values on request, as k about extended value ranges ? power rating depends on the max. temperature at the solder poi nt, the component placement density and the substrate material ? marking: 4 digits, m10 - no marking 1) measuring conditions in ac c. with en 140 401-801 2) rated voltage: standard electrical specifications model size power rating p 70 c limiting element voltage max v ? temperature coefficient ppm/k tolerance % resistance range e-series inch metric en 140 401-801 eia 575 m10 0402 1005 0.063 0.063 25 25; 50 0.5; 1 10r - 20k* ) 24 - 96 m11 0603 1608 0.1 0.063 75 25 0.1; 0.25; 0.5; 1 10r - 56k* ) 24 - 96 50 0.1; 0.25; 0.5; 10r - 56k* ) 1 1r0 - 100k* ) m12 0805 2012 0.125 0.1 150 25 0.1; 0.25; 0.5; 1 10r - 100k* ) 24 - 96 50 0.1; 0.25; 0.5; 10r - 100k* ) 1 1r0 - 220k* ) m25 1206 3216 0.25 0.125 200 25 0.1; 0.25; 0.5; 1 10r - 220k* ) 24 - 96 50 0.1; 0.25; 0.5; 10r - 220k* ) 1 1r0 - 330k* ) technical specifications parameter unit m10 m11 m12 m25 rated dissipation at 70 c (en 140 401-801| eia 575) w 0.063 0.1 0.063 0.125 0.1 0.25 0.125 limiting element voltage 2) v ? 25 75 150 200 insulation voltage (1 min) v dc/ac peak > 50 > 100 > 200 > 300 thermal resistance 1) k/w 870 1) - 550 1) - 440 1) - 220 1) - insulation resistance > 10 9 category temperature range c - 55 to + 125 (+ 155) failure rate h -1 0.3 ? 10 -9 weight/1000 pcs g 0.65 2 5.5 10 pr
document number: 20028 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 15-sep-06 145 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric dimensions size dimensions [ in millimeters] inch metric l w h t1 t2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.1 0.2 0.1 0603 1608 1.55 0.85 0.1 0.45 0.05 0.30 0.2 0.3 0.2 0805 2012 2.0 1.25 0.15 0.45 0.05 0.30 0.3 0.2 1206 3216 3.2 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 solder pad dimensions [in millimeters] size reflow wave soldering inch metric a b l a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.4 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 note: products can be ordered using either the pr oduct description or the part number. part number and product description part numbering: m1004020d5620dp000 model/size special character tcr value tolerance packaging special m100402 m110603 m120805 m251206 0 = neutral d = 25 ppm/k c = 50 ppm/k 3 digit value 1 digit multiplier multiplier 8 = *10 -2 9 = *10 -1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % p0 p1 p5 pn pz up to 2 digits 00 = standard product description: m10 25 562r 0.5 % p0 m10 25 562r 0.5 % p0 model tcr resistance value tolerance pac k ag i n g 1) m10 m11 m12 m25 25 ppm/k 50 ppm/k 49k9 = 49.9 k 5r1 = 5.1 0.1 % 0.25 % 0.5 % 1 % p0 p1 p5 pn pz 1) please refer to table packaging, page 146. + 0.10 - 0.05 + 0.20 - 0.10 + 0.10 - 0.20 + 0.20 - 0.10 m 0 1 0 0 4 0 2 0 d 5 6 2 0 d p 0 0
www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 20028 146 revision: 15-sep-06 m10, m11, m12, m25 vishay draloric thin film, rectangular , resistor chips 1) for tcr 25 ppm/k and tolerance 0.1 % only. packaging model reel tape width diameter pieces/reel packing code paper m10 8 mm 180 mm/7" 330 mm/13" 10 000 50 000 p0 pz m11 m12 m25 8 mm 180 mm/7" 180 mm/7" 330 mm/13" 1000 1) 5000 20 000 p1 p5 pn temperature rise 90 8 0 70 60 50 40 30 20 10 0 0 0.1 0.2 0.3 0.4 0.5 power in w 0402 1206 0 8 05 0603 temperature in rise in c deratin g 120 100 8 0 60 40 20 0 - 55 -25 0 25 50 75 100 125 150 175 ambient temperature in c 70 rated power in % 120 110 100 90 8 0 70 60 10 100 1k 10k 100k non-linearity non-li nearity a 3 in db resistance value in m10 m25 m12 m11 3 2 1 current noise current noise in v/v resistance value in 0.5 0.3 0.1 0.01 0.03 0.05 100 1k 10k 100k 1m m10 m11 m12 m25
document number: 20028 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 15-sep-06 147 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric 60 40 20 0 - 20 - 40 - 60 - 8 0 hf performance phas e an g l e in ? frequency f in mhz 2 5 10 50 100 500 1000 10k 4.75k 1k 100 10 m11 60 40 20 0 - 20 - 40 - 60 - 8 0 hf performance frequency f in mhz 2 5 10 50 100 500 1000 [z]-ro in % ro 10 100 100 100 100 100 1k 4.75k 10k m11 hf performance phase an g le in ? 60 40 20 0 - 20 - 40 - 60 - 8 0 frequency f in mhz 2 5 10 50 100 500 1000 m12 10 100 1k 10k 60 40 20 0 - 20 - 40 - 60 - 8 0 hf performance frequency f in mhz 2 5 10 50 100 500 1000 [z]-ro in % ro 10 100 1k m12 10k 1k 100 10 sin g le-pulse hi g h volta g e overload test 1.2 / 50 s en140000 4.27 t est v olta g e in v resistance value in 10r 100r 1k 10k 100k 3k m12 m11 1k 100 10 sin g le-pulse hi g h volta g e overload test 10 / 700 s en140000 4.27 test v olta g e in v resistance value in 10r 100r 1k 10k 100k 3k m12 m11
www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 20028 148 revision: 15-sep-06 m10, m11, m12, m25 vishay draloric thin film, rectangular , resistor chips 10 1 0.1 pulse ratin g p 0 pow er ratin g p in w square pulse t i in s 10 -5 10 -4 10 -3 10 -2 10 -1 110 100 0.01 secondary conditions: a) p 0 (peak pulse, sin g le pulse) b) ? u 70 c c) umax see dia g ram (max pulse volta g e) m25 m10 m12 m11 1 0.1 square pulse t i in s 10 -5 10 -4 10 -3 10 -2 10 -1 110 0.01 pulse ratin g p p 70 10 100 power ratin g p in w secondary conditions: a) p p70 (permissible constant power at ? u = 70 c) b) ? u 70 c c) u max see dia g ram (max pulse volta g e) m10 m11 m12 m25 square pulse t i in s 10 -5 10 -4 10 -3 10 -2 10 -1 110 maximum pulse volta g e 1000 pulse volta g e max in v 8 00 600 400 200 0 m25 m12 m11 m10 secondary conditions: a) p see dia g ram (pulse ratin g ) b) ? u 70 c performance test conditions of test test results tolerances 0.1 %/ 0.25 % 0.5 %/ 1.0 % endurance test at 70 c iec 60115-1 4.25.1 1000 hours at 70 c, 1.5 hours ?on?, 0.5 hours ?off? 0.2 % 0.5 % endurance at uct iec 60115-1 4.25.3 1000 hours at 125 c without load 0.2 % 0.5 % overload test iec 60115-1 4.13 short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 0.05 % 0.1 % thermal shock iec 60115-1 4.19, iec 60068-2-14 rapid change between upper and lower category temperature 0.05 % 0.1 % damp heat steady state iec 60115-1 4.24, iec 60068-2-3 56 days at 40 c and 93 % relative humidity 0.2 % 0.5 % resistance to soldering heat iec 60115-1 4.18, iec 60068-2-20 10 seconds at 260 c solder bath temperature 0.05 % 0.2 %
document number: 20028 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 15-sep-06 149 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric applicable specifications ? cecc40000/40400/40401-801 ? en140400/iec 60115 - 1/en 140 401-801
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
